Classic Wide Block Oak Worktops

Consisting of beautiful, wide jointed staves of random widths between 55 mm and 90 mm. Expect to find around 8 to 10 staves across the width of an average Oak block worktop of around 630 mm.
Oak Worktops
A Norfolk Oak Classic Wide Block Worktop is unique. You will immediately notice the huge difference our wide staves of random widths 55 - 90 mm make over narrow ones of 40 mm or less butchers block worktops. For a start, the beauty of the grain is immediately apparent. Instead of 16 to 30 little bits of wood across the width of a butchers block worktop, you get 8 to 10 beautiful pieces of timber which show the real splendor of wood.
Oak Wide Block Worktop Stave Comparison

Very few customers actually know the only reason mass market butchers block worktops are made with narrow blocks; the quality of the timber they start with is so low there is literally nothing else they can make from it. All the good grades go first to fine furniture (which is what we use), then to kitchen cabinet doors and lower grade furniture, then to building type products, and finally, what's left can only be cut up in to small pieces, finger jointed and made in to products like poor quality butchers block worktops. Take a look at our video for a comparison between a typical narrow butchers block worktop and our Classic Wide Block worktops.

Oak Classic Wide Block Worktops Comparison Video

Classic Wide Block Oak Worktops made to any size...

We can construct wide block worktops to almost any shape and size. Feel free to use our quote calculator below, it will provide pricing based on custom measurements. If you have specific sizes or shape requirements you would like to discuss, please don't hesitate to contact us via telephone or email, we will gladly assist and advise.

All of our Oak worktops are approximately 45 mm thick as standard. Custom thicknesses available on request.

Custom Oak Worktop Quote Calculator

mm
m/cm
cm
ft/in
in
Quote
Length: mm
Width: mm
Oiling: No
Price: £
Length (mm)
mm
Width (mm)
mm
Length (m/cm)
mcm
Width (m/cm)
mcm
Length (cm)
cm
Width (cm)
cm
Length (ft/in)
ftin
Width (ft/in)
ftin
Length (in)
in
Width (in)
in
Pre-Installation Oiling
Please note that all orders will be processed to the nearest millimetre Imperial measurements are calculated at 1 inch = 25.4 mm

All quotes are processed to the nearest millimetre. (1 inch = 25.4 mm)

All prices include VAT

As standard we supply our Oak block worktops with square edges, sanded smooth, ready to oil. If you would like to see a list of the customisations we offer, such as sink cutouts or worktop edging, including pricing, please visit our Bespoke Service page for more information. If you have more specific requirements in mind or would like to receive a complete quotation please visit our Receiving A Bespoke Quotation page for more information.

> Worktops > Oak Worktops > Classic Wide Block Oak Worktops